Automatic Upper Arm Blood Pressure Monitor

Two separate user profiles can each store up to 99 readings, making it easier to follow measurements over time without mixing histories.

The monitor can also display the average of the three most recent readings.

2 users. 99 readings per user. 198 total stored readings. 3-reading average.

Optional voice prompts guide you through the measurement process and can read measurement results aloud.

Voice can be turned on or off from the monitor settings.

If the monitor detects an irregular heartbeat pattern during measurement, an indicator appears on the display.

The irregular-heartbeat indicator is informational and is not a diagnosis. Consult a healthcare professional if you have questions about your readings or heart rhythm.

The included cuff fits adult upper arms measuring 22–32 cm (8.7–12.6 in).

For best results, position the lower edge of the cuff approximately 2–3 cm above the elbow and keep your arm supported at heart level.

1. Sit quietly. Avoid eating, smoking, or exercise immediately before measuring. Rest for about 10 minutes before taking a reading; allow about 30 minutes after intensive exercise.

2. Position the cuff. Place the cuff on your bare upper arm, approximately 2–3 cm above the elbow. Keep it snug enough to allow about one finger underneath.

3. Stay still. Sit with your back supported and your arm at heart level. Press Start, and avoid moving or talking until the measurement is complete.

1 × KWL-B01 Blood Pressure Monitor

1 × Upper-Arm Cuff

1 × User Manual

1 × Storage Bag

Use four AAA batteries or the specified optional adapter. Do not use batteries and an adapter at the same time.

Manufactured by Dongguan Kangweile Electronic Technology Co., Ltd.

Distributed / sold by Seravni.

For adult upper-arm use. Read the supplied instructions before measuring. This monitor is not intended to replace regular medical checkups.

A healthcare professional should interpret concerning or unusual readings. Do not change prescribed medication without medical advice. Consult your clinician before use if you have an irregular heart rhythm or conditions requiring special measurement precautions.

The supplied instructions warn against use during dialysis or while taking anticoagulants, antiplatelets or steroids because of a risk of internal bleeding. Consult a healthcare professional about a suitable measurement method. The pulse display is not suitable for checking the frequency of a cardiac pacemaker.

Keep away from children, pets, water and flammable gas. Keep tubing away from the neck. Do not disassemble or attempt repairs. Clean the housing with a soft cloth and follow the supplied care instructions.

Who is this monitor designed for?

The KWL-B01 is designed for adult upper-arm blood pressure measurement at home.

What does it measure?

It measures systolic blood pressure, diastolic blood pressure, and pulse rate.

What arm size does the included cuff fit?

The included cuff fits upper-arm circumferences from 22 to 32 cm (8.7 to 12.6 in).

Can two people use the same monitor?

Yes. The monitor provides two separate memory profiles, with up to 99 stored readings per user.

Does it save readings automatically?

Yes. Completed measurements are stored with date and time.

Does it calculate an average?

Yes. When reviewing memory, the monitor can display the average of the three most recent readings.

Does it have voice guidance?

Yes. Voice guidance can be enabled or disabled in settings.

Does it detect irregular heartbeat?

The monitor can display an irregular-heartbeat indicator when an irregular rhythm pattern is detected during measurement. This feature is informational and is not a diagnosis.

How is it powered?

The monitor uses four AAA batteries. It also supports an optional 6 V DC / 1000 mA power adapter. Do not use batteries and an adapter at the same time.

Can this replace regular medical checkups?

No. The device is not intended to replace regular medical checkups. Consult a healthcare professional about concerning or unusual readings.